Home » Hex Bolt Dimensions Chart — Metric & Inch

Hex Bolt Dimensions Chart — Metric & Inch

Hex bolt dimension lookup

Search the chart by nominal size, then filter metric or inch rows. The table keeps nominal body diameter, thread pitch or TPI, across-flats width, minimum across-corners width, and head height separate so you can use the values correctly in CAD and inspection.

MECHANITEC / ENGINEERING REFERENCE

Hex Bolt Dimensions Chart — Metric & Inch

A bounded CAD and inspection reference for standard hex-head bolts and screws, with thread size, across-flats, across-corners, head height, and nominal body-diameter reference kept separate from heavy-hex structural geometry.

1–7 of 7 matching rows (7 total)

Hex Bolt Dimensions Chart — Metric & Inch — page 1 of 1
System Thread designation Pitch or TPI Pitch (mm) TPI (TPI) Head family Standard family Threading style Nominal diameter (mm) Nominal diameter (in) Body diameter reference (mm) Body diameter reference (in) Width across flats (mm) Width across flats (in) Minimum width across corners (mm) Minimum width across corners (in) Head height (mm) Head height (in) Thread-length rule Governing standard Source/cross-check Value status
metric M6 × 1.0 1.0 mm coarse 1 standard-hex ISO 4014/4017 ISO 4014 partially threaded or ISO 4017 fully threaded 6 0.23622047 6 0.23622047 10 0.39370079 11.05 0.43503937 4 0.15748031 See ISO 4014 for partially threaded bolts; ISO 4017 is fully threaded. ISO 4014:2022 / ISO 4017:2022 ISO 4014/4017:2022 bounded transcription Standard-hex reference; verify the licensed row.
metric M8 × 1.25 1.25 mm coarse 1.25 standard-hex ISO 4014/4017 ISO 4014 partially threaded or ISO 4017 fully threaded 8 0.31496063 8 0.31496063 13 0.51181102 14.38 0.56692913 5.3 0.20866142 See ISO 4014 for partially threaded bolts; ISO 4017 is fully threaded. ISO 4014:2022 / ISO 4017:2022 ISO 4014/4017:2022 bounded transcription Required verification vector; standard-hex reference.
metric M10 × 1.5 1.5 mm coarse 1.5 standard-hex ISO 4014/4017 ISO 4014 partially threaded or ISO 4017 fully threaded 10 0.39370079 10 0.39370079 16 0.62992126 17.77 0.6996063 6.4 0.2519685 See ISO 4014 for partially threaded bolts; ISO 4017 is fully threaded. ISO 4014:2022 / ISO 4017:2022 ISO 4014/4017:2022; Fastenal cross-check Standard-hex reference; legacy DIN 931/933 may show a different wrench size.
metric M12 × 1.75 1.75 mm coarse 1.75 standard-hex ISO 4014/4017 ISO 4014 partially threaded or ISO 4017 fully threaded 12 0.47244094 12 0.47244094 18 0.70866142 20.03 0.78858268 7.5 0.29527559 See ISO 4014 for partially threaded bolts; ISO 4017 is fully threaded. ISO 4014:2022 / ISO 4017:2022 ISO 4014/4017:2022; Fastenal cross-check Required verification vector; standard-hex reference.
metric M16 × 2.0 2.0 mm coarse 2 standard-hex ISO 4014/4017 ISO 4014 partially threaded or ISO 4017 fully threaded 16 0.62992126 16 0.62992126 24 0.94488189 26.75 1.05314961 10 0.39370079 See ISO 4014 for partially threaded bolts; ISO 4017 is fully threaded. ISO 4014:2022 / ISO 4017:2022 ISO 4014/4017:2022 bounded transcription Standard-hex reference; verify the licensed row.
inch 1/4-20 UNC 20 TPI UNC 20 standard-hex ASME B18.2.1 Standard hex bolt/cap screw; thread length follows bolt-length rule 6.35 0.25 6.35 0.25 11.113 0.4375 12.294 0.484 4.763 0.1875 For standard hex bolts, nominal LT is 2D + 0.25 in for lengths through 6 in; inspect the applicable table and grip length. ASME B18.2.1-2012 (R2021) ASME B18.2.1 Table 2 bounded transcription Required verification vector; standard hex only.
inch 1/2-13 UNC 13 TPI UNC 13 standard-hex ASME B18.2.1 Standard hex bolt/cap screw; thread length follows bolt-length rule 12.7 0.5 12.7 0.5 19.05 0.75 20.98 0.826 8.731 0.34375 For standard hex bolts, nominal LT is 2D + 0.25 in for lengths through 6 in; inspect the applicable table and grip length. ASME B18.2.1-2012 (R2021) ASME B18.2.1 Table 2 bounded transcription Required verification vector; standard hex only.

Search and sort apply to all 7 rows. Print and CSV include only the 7 rows shown on this page.

This page covers standard hex-head geometry. Metric rows are scoped to ISO 4014 and ISO 4017. Inch rows are scoped to ASME B18.2.1. Heavy-hex structural bolts, flange bolts, reduced-head products, JIS products, and specialty screws require their own standard and are not mixed into this chart.

Across flats is the wrench size

Across flats is the distance between two opposite flat faces of the head. It is the nominal wrench or socket size for the standard hex family. An M8 ISO head uses 13 mm across flats. An M12 ISO head uses 18 mm. The inch reference uses 7/16 in for 1/4-20 and 3/4 in for 1/2-13.

Across corners is a different measurement. It is useful for checking the envelope around the head, but it is not the wrench size. The chart shows the minimum standard across-corners value where the source table defines it. Do not replace that standard limit with an ideal regular-hexagon calculation when the head must pass an inspection or fit a clearance pocket.

Head height and body diameter

Head height controls the axial envelope above the bearing surface. It matters when a bolt must clear a cover, fit below a guard, or sit inside a pocket. M8 is 5.3 mm high and M12 is 7.5 mm high in the selected ISO reference. The 1/4-20 and 1/2-13 inch rows use 11/64 in and 11/32 in nominal head heights.

The body-diameter column is a nominal reference, not a promise that every point on a manufactured shank equals that value. The standard also defines maximum and minimum limits, thread geometry, rolled or cut-thread conditions, and permissible body styles. Use the licensed standard when you need inspection limits or a detailed solid model.

ISO 4014 versus ISO 4017

ISO 4014 covers hexagon head bolts with a partially threaded shank. ISO 4017 covers fully threaded hexagon head screws. Their standard head dimensions are used together in this lookup, but their thread-length rules are different.

Specify the standard family when thread length matters. Do not call a fully threaded ISO 4017 screw an ISO 4014 bolt simply because the head dimensions match. The part designation, length, material, property class, coating, and supplier catalog control the purchased fastener.

Inch standard hex versus heavy hex

ASME B18.2.1 includes several inch fastener families. This chart selects the standard hex row and excludes heavy-hex structural geometry. A 1/2 in standard hex head is 3/4 in across flats, while a heavy-hex head for a structural application is larger. Mixing those rows can make a wrench, clearance pocket, washer, or mating nut incorrect.

Use the bolt size to wrench and socket size chart when the question is which tool fits a fastener. Use this chart when you need the bolt head and body dimensions for CAD, inspection, or clearance design.

CAD and manufacturing notes

  1. Model the nominal thread diameter and pitch from the thread designation.
  2. Use across flats for the wrench or socket envelope.
  3. Use across corners for surrounding clearance, not tool selection.
  4. Use head height from the same standard family as the across-flats value.
  5. Keep standard hex, heavy hex, flange, and reduced-head families separate.
  6. Specify bolt length and thread length independently from head geometry.
  7. Check the material and property class against the required preload and load case.

A dimensional chart does not prove that a bolt joint is strong enough. Joint stiffness, preload, friction, fatigue, thread engagement, bearing stress, and the selected grade require a separate engineering check.

Compare the hex nut dimensions chart for the matching regular-nut family. Use the metric thread pitch chart for metric coarse and fine pitch identification, and the UNC and UNF thread chart for inch thread families.

Sources and limits

The metric scope follows the official ISO 4014:2022 and ISO 4017:2022 records. The inch scope follows ASME B18.2.1-2012 (R2021), cross-checked against its public dimensional table. Metric M10 and M12 values are also cross-checked against the Fastenal ISO 4017 product standard. Confirm the current licensed standard and supplier drawing before production use.

Frequently asked questions

What wrench fits an M8 standard hex bolt?

The ISO reference uses 13 mm across flats for an M8 standard hex head. Check the exact product standard because flange, JIS, reduced-head, and legacy DIN parts can differ.

What is the head height of an M12 hex bolt?

The bounded ISO reference lists 7.5 mm nominal head height for M12. Use the standard tolerance when you need an inspection limit.

Is a 1/2 in hex bolt head always 3/4 in?

No. 3/4 in is the standard-hex across-flats value in the ASME B18.2.1 row used here. Heavy-hex structural bolts and other product families use different head dimensions.