Home » Set Screw Size Chart — Thread, Hex Key & Tap Drill

Set Screw Size Chart — Thread, Hex Key & Tap Drill

Set screw size and tool lookup

Use the chart to find a metric or inch socket set screw by thread, point style, hex-key size, and cutting tap-drill reference. The point-style filter keeps cup, flat, truncated-cone, and dog-point screws visible as separate standard families.

MECHANITEC / ENGINEERING REFERENCE

Set Screw Size Chart — Thread, Hex Key & Tap Drill

A bounded lookup for metric and inch socket set screws, with point style, socket key size, key engagement where available, and a cross-reference into the shared tap-drill dataset.

1–16 of 16 matching rows (16 total)

Set Screw Size Chart — Thread, Hex Key & Tap Drill — page 1 of 1
System Thread designation Thread family Pitch (mm) TPI (TPI) Point style Hex key size Hex key dimension (mm) Hex key dimension (in) Minimum key engagement (mm) Minimum key engagement (in) Tap-drill dataset Tap-drill record Cutting tap drill Point geometry note Hex-key cross-reference Governing standard Source/cross-check Value status
metric M3 × 0.5 Metric coarse 0.5 cup 1.5 mm 1.5 0.05905512 tap-drill-size-chart m3x0-5 2.50 mm Cup point; verify the licensed ISO 4029 row for point dimensions. Set-screw socket; do not use the 2.5 mm cap-screw key row as a substitute. ISO 4029:2026 ISO 4029:2026; MISUMI hex-key cross-check Bounded reference; verify the purchased screw drawing.
metric M4 × 0.7 Metric coarse 0.7 cup 2 mm 2 0.07874016 tap-drill-size-chart m4x0-7 3.30 mm Cup point; verify the licensed ISO 4029 row for point dimensions. Set-screw socket; do not use the 3 mm cap-screw key row as a substitute. ISO 4029:2026 ISO 4029:2026; MISUMI hex-key cross-check Bounded reference; verify the purchased screw drawing.
metric M5 × 0.8 Metric coarse 0.8 cup 2.5 mm 2.5 0.0984252 tap-drill-size-chart m5x0-8 4.20 mm Cup point; verify the licensed ISO 4029 row for point dimensions. Set-screw socket; do not use the 4 mm cap-screw key row as a substitute. ISO 4029:2026 ISO 4029:2026; MISUMI hex-key cross-check Bounded reference; verify the purchased screw drawing.
metric M6 × 1.0 Metric coarse 1 cup 3 mm 3 0.11811024 tap-drill-size-chart m6x1-0 5.00 mm Cup point; verify the licensed ISO 4029 row for point dimensions. Set-screw socket is 3 mm; the related M6 cap-screw row uses 5 mm and is not interchangeable. ISO 4029:2026 ISO 4029:2026; MISUMI hex-key cross-check Required verification vector; bounded reference.
metric M8 × 1.25 Metric coarse 1.25 cup 4 mm 4 0.15748031 tap-drill-size-chart m8x1-25 6.75 mm Cup point; verify the licensed ISO 4029 row for point dimensions. Set-screw socket is 4 mm; the related M8 cap-screw row uses 6 mm and is not interchangeable. ISO 4029:2026 ISO 4029:2026; MISUMI hex-key cross-check Required verification vector; bounded reference.
metric M8 × 1.25 Metric coarse 1.25 flat 4 mm 4 0.15748031 tap-drill-size-chart m8x1-25 6.75 mm Flat point; point geometry is governed by ISO 4026:2026, not the cup-point table. Socket size remains 4 mm for this thread family; point style does not authorize a different key. ISO 4026:2026 ISO 4026:2026; MISUMI hex-key cross-check Required alternate-point verification vector; bounded reference.
metric M8 × 1.25 Metric coarse 1.25 truncated-cone 4 mm 4 0.15748031 tap-drill-size-chart m8x1-25 6.75 mm Truncated cone point; point geometry is governed by ISO 4027:2026. Socket size remains 4 mm for this thread family; verify the selected point drawing. ISO 4027:2026 ISO 4027:2026; MISUMI hex-key cross-check Bounded reference; verify the purchased screw drawing.
metric M8 × 1.25 Metric coarse 1.25 dog 4 mm 4 0.15748031 tap-drill-size-chart m8x1-25 6.75 mm Dog point; point geometry is governed by ISO 4028:2026. Socket size remains 4 mm for this thread family; verify dog-point length and seat detail. ISO 4028:2026 ISO 4028:2026; MISUMI hex-key cross-check Bounded reference; verify the purchased screw drawing.
metric M10 × 1.5 Metric coarse 1.5 cup 5 mm 5 0.19685039 tap-drill-size-chart m10x1-5 8.50 mm Cup point; verify the licensed ISO 4029 row for point dimensions. Set-screw socket is 5 mm; the related M10 cap-screw row uses 8 mm and is not interchangeable. ISO 4029:2026 ISO 4029:2026; MISUMI hex-key cross-check Bounded reference; verify the purchased screw drawing.
metric M12 × 1.75 Metric coarse 1.75 cup 6 mm 6 0.23622047 tap-drill-size-chart m12x1-75 10.00 mm Cup point; verify the licensed ISO 4029 row for point dimensions. Set-screw socket is 6 mm; the related M12 cap-screw row uses 10 mm and is not interchangeable. ISO 4029:2026 ISO 4029:2026; MISUMI hex-key cross-check Bounded reference; verify the purchased screw drawing.
metric M16 × 2 Metric coarse 2 cup 8 mm 8 0.31496063 tap-drill-size-chart m16x2-0 14.00 mm Cup point; verify the licensed ISO 4029 row for point dimensions. Set-screw socket is 8 mm; the related M16 cap-screw row uses 14 mm and is not interchangeable. ISO 4029:2026 ISO 4029:2026; MISUMI hex-key cross-check Bounded reference; verify the purchased screw drawing.
inch 1/4-20 UNC UNC 20 cup 1/8 in 3.175 0.125 3.175 0.125 tap-drill-size-chart 1-4-20-unc #7 Cup point; standard Table 14 C dimension is separate from optional knurled cup points. Set-screw socket is 1/8 in; the related 1/4-20 cap-screw row uses 3/16 in and is not interchangeable. ASME B18.3-2026 ASME B18.3-2026 Table 14; Brassland cross-check Required verification vector; bounded reference.
inch 1/4-20 UNC UNC 20 flat 1/8 in 3.175 0.125 3.175 0.125 tap-drill-size-chart 1-4-20-unc #7 Flat point; point diameter is separate from the cup-point and cone-point geometry. Socket size remains 1/8 in for this thread family; confirm the point style on the part callout. ASME B18.3-2026 ASME B18.3-2026 Table 14; Brassland cross-check Bounded reference; verify the purchased screw drawing.
inch 1/4-28 UNF UNF 28 cup 1/8 in 3.175 0.125 3.175 0.125 tap-drill-size-chart 1-4-28-unf #3 Cup point; verify the current B18.3 row and optional cup-point condition. Socket size is tied to the set-screw diameter, not to the UNC/UNF pitch alone. ASME B18.3-2026 ASME B18.3-2026 Table 14; Brassland cross-check Required UNF verification vector; bounded reference.
inch 1/2-13 UNC UNC 13 cup 1/4 in 6.35 0.25 6.35 0.25 tap-drill-size-chart 1-2-13-unc 27/64 in Cup point; standard Table 14 C dimension is separate from optional knurled cup points. Set-screw socket is 1/4 in; the related 1/2-13 cap-screw row uses 3/8 in and is not interchangeable. ASME B18.3-2026 ASME B18.3-2026 Table 14; Brassland cross-check Required verification vector; bounded reference.
inch 1/2-20 UNF UNF 20 cup 1/4 in 6.35 0.25 6.35 0.25 tap-drill-size-chart 1-2-20-unf 29/64 in Cup point; verify the current B18.3 row and optional cup-point condition. Socket size is tied to the set-screw diameter, not to the UNC/UNF pitch alone. ASME B18.3-2026 ASME B18.3-2026 Table 14; Brassland cross-check Bounded reference; verify the purchased screw drawing.

Search and sort apply to all 16 rows. Print and CSV include only the 16 rows shown on this page.

The metric rows use the current ISO 4026, ISO 4027, ISO 4028, and ISO 4029 families. The inch rows use ASME B18.3. The chart is a bounded reference for common sizes, not a replacement for the licensed standard or the selected supplier drawing.

Which hex key fits a set screw?

The socket is sized for the set-screw standard, not only for the nominal thread diameter. A 1/4-20 socket set screw uses a 1/8 in key. A 1/2-13 socket set screw uses a 1/4 in key. Metric examples include a 3 mm key for M6, 4 mm for M8, 5 mm for M10, and 6 mm for M12.

Do not choose a key by comparing the set-screw thread with a general Allen-key chart. Socket-head cap screws have a different head and socket series. For example, the related M8 cap-screw row uses a 6 mm key, while the M8 set-screw rows in this chart use a 4 mm key. A key that feels close can damage the socket and reduce the available torque.

Keep inch and metric keys separate. A 3 mm key is not an interchangeable replacement for a 1/8 in key even though the dimensions are close. The chart shows conversions for comparison only; use the specified source unit when you select the tool.

Cup, flat, cone, and dog points

Point style changes how the screw contacts the mating part:

  • Cup point: A concave point bites into the surface and is common for general holding. ISO 4029 and ASME B18.3 define the standard cup-point family.
  • Flat point: The flat end spreads contact over a broader area and can reduce marking. ISO 4026 covers the metric flat-point family.
  • Truncated cone point: The tapered point locates in a prepared feature or produces a more concentrated contact. ISO 4027 governs the metric family.
  • Dog point: The cylindrical projection can locate in a hole, slot, or other feature. ISO 4028 covers the metric dog-point family.

The socket size can remain the same across point styles for a given thread, but point diameter, length, angle, and engagement are separate dimensions. Check the point style in the part callout. Optional knurled or self-locking cup points can use different point dimensions from the standard cup-point table.

Tap a set-screw hole

The chart links each row to the shared tap-drill dataset. For example, the M6 × 1.0 row points to a 5.00 mm cutting tap drill, 1/4-20 UNC points to a #7 drill, and 1/2-13 UNC points to a 27/64 in drill. These are cross-references, not universal manufacturing instructions.

Tap-drill selection depends on the tap type, target thread percentage, material, coating, hole depth, and required engagement. A forming tap normally needs a larger pre-drilled hole than a cutting tap. Check the tap manufacturer’s recommendation and the required internal-thread class before machining.

Drill undersize only when the selected process requires it, then control the finished hole and thread. For a blind hole, provide chip space, tap runout, and a way to remove the tap or set screw if service access matters.

Specify the set screw in CAD

  1. Specify the thread designation, including pitch or TPI and UNC/UNF family where applicable.
  2. Specify the point style and the governing standard.
  3. Specify the nominal length and confirm that the socket has enough key engagement.
  4. Specify the material, property class, finish, and corrosion requirements separately.
  5. Show the tapped-hole depth, thread engagement, and access for the selected key.
  6. Check whether the point will mark, deform, or gall the mating surface.

Do not use a set screw as a substitute for a tensile fastener. The ISO records state that these screws are not intended for tensile load. A set screw can retain or locate a part, but the joint still needs a design check for torque, vibration, contact pressure, and service adjustment.

Use the Allen wrench and hex key chart for the separate socket-head cap-screw family. Use the tap drill size chart for cutting and forming recommendations. Use the metric thread pitch chart to compare metric coarse and fine pitches, and the UNC and UNF thread chart for inch thread identification.

Sources and limits

The metric point families follow the official ISO 4026:2026, ISO 4027:2026, ISO 4028:2026, and ISO 4029:2026 records. The inch socket and engagement values follow ASME B18.3-2026. The metric dimensions are cross-checked against the Fastenal ISO 4026 product standard and the MISUMI hex-key table. Verify the licensed standard, exact point style, material, and supplier drawing before production use.

Frequently asked questions

What hex key fits an M6 set screw?

The bounded metric reference uses a 3 mm key for M6 socket set screws. Confirm the point family and supplier drawing before applying torque.

Can I use the M6 Allen-key size for an M6 set screw?

Not automatically. The related M6 socket-head cap screw uses a 5 mm key, while the set-screw reference uses 3 mm. Identify the fastener family first.

What tap drill is used for a 1/4-20 set screw?

The shared tap-drill reference lists a #7 cutting drill for 1/4-20 UNC. Confirm the tap type, material, thread percentage, and manufacturer recommendation before drilling.