Home » AISI and SAE Steel Grade Designations

A steel designation helps identify a grade family and locate its specification, but the code alone does not certify chemistry or mechanical properties. SAE J402 describes a newer alphanumeric framework while explaining the traditional four- and five-digit system that still appears on drawings and material records. This short table uses only examples explicitly identified in the SAE public summary.

AISI and SAE Steel Grade Designations

MECHANITEC / ENGINEERING REFERENCE

How to read selected traditional SAE steel designations

Five examples from SAE J402 show the information conveyed by traditional four- and five-digit steel designations and element letters.

1–5 of 5 matching rows (5 total)

How to read selected traditional SAE steel designations — page 1 of 1
SAE designation Designation form What the example illustrates Limit
SAE 1035 Traditional four-digit designation The final two digits, 35, indicate the approximate mean carbon content in hundredths of a percent. The grade specification defines the allowed chemistry range.
SAE 52100 Traditional five-digit designation The final three digits, 100, indicate the approximate mean carbon content in hundredths of a percent. Use the standard chemistry range; the code alone is not a certificate.
SAE 10B21 Traditional designation with element letter The B indicates a boron addition to the standard grade code. The letter does not state the full chemistry range.
SAE 12L14 Traditional designation with element letter The L indicates a lead addition to the standard grade code. Confirm machinability and product requirements from the grade specification.
SAE 10V45 Traditional designation with element letter The V indicates a vanadium addition to the standard grade code. Confirm the chemistry limits and delivery condition from the grade specification.

Search and sort apply to all 5 rows. Print and CSV include only the 5 rows shown on this page.

In a traditional four-digit code such as SAE 1035, the first two digits identify the carbon or alloy system, while the last two digits indicate the approximate mean carbon content in hundredths of a percent. SAE’s example says 35 represents an approximate mean of 0.35 percent carbon. The allowed chemistry is controlled by the applicable grade specification, including permitted range and analysis rules.

A traditional five-digit example is SAE 52100. SAE J402 explains that the final three digits, 100, indicate the approximate mean carbon content in hundredths of a percent. That shorthand still is not a full chemistry table. The actual grade limits, product form, processing condition and mechanical requirements have to be read from the referenced specification and material certificate.

Letters can modify a traditional grade designation. In SAE’s examples, B in 10B21 indicates a boron addition, L in 12L14 indicates lead, and V in 10V45 indicates vanadium. The letter flags an alloying modification; it does not state the complete allowed range or every manufacturing requirement. Use the exact grade specification when selecting or accepting material.

Historically, engineers often called these AISI/SAE grades because the organizations coordinated many familiar carbon and alloy steel designations. Current SAE J402 discusses the traditional numeric system alongside a newer alphanumeric code built on the Unified Numbering System framework. A legacy number on a drawing should therefore be interpreted in its documented context, rather than assumed to describe every modern steel grade.

The designation is useful for searching a standard, comparing supplier paperwork and checking that a purchase order references the intended grade. It does not identify heat treatment, hardness, strength, cleanliness, product dimensions, delivery condition or certification status by itself. Similar labels can be used in different product standards with distinct requirements, so verify the complete standard number and revision.

When a drawing lists a legacy SAE grade, compare it with the material certificate and the purchase specification. If the supplier proposes an equivalent, review chemistry, mechanical properties, processing condition and intended use with the responsible engineer. A similar code or family name alone is not proof of interchangeability.

SAE notes that the old numeric system could not encode some newer or nonstandard chemistries and dual requirements. The newer system was introduced to expand that capacity while preserving references to traditional grades. For a new design or procurement, use the current designation and full material specification required by the project.

The examples in this page illustrate code reading only. They are not intended to rank steels or recommend one grade for a component. Strength, hardenability, weldability, machinability, corrosion resistance and cost depend on chemistry, processing and section size. Define the required performance first, then consult the relevant material standard and supplier data to choose an approved grade.

If a material record contains only a short legacy designation, ask for the full specification before releasing a purchase or substituting stock. A certificate should identify the applicable grade and provide the required test or chemistry results. When two documents use different naming systems, resolve the cross-reference through the standards listed on the drawing or order rather than assuming matching digits mean equivalent material.

Sources

The examples and code interpretation follow SAE International’s J402_202403 public summary. It identifies the traditional system, the five examples above and the newer alphanumeric framework.