Home » Supplementary Welding Symbols Reference

Supplementary welding symbols add instructions to a weld symbol, such as a required root condition or weld-face contour. This reference summarizes selected indications in plain language and does not reproduce symbol artwork, dimensions or the full construction rules from the governing standard.

Supplementary Welding Symbols Reference

MECHANITEC / ENGINEERING REFERENCE

Selected supplementary welding symbol meanings

A text reference to supplementary welding symbol functions and limits; it describes the indications without reproducing standard artwork.

1–6 of 6 matching rows (6 total)

Selected supplementary welding symbol meanings — page 1 of 1
Supplementary symbol Where it is used What it communicates What it does not establish
Melt-through Supplementary mark paired with a groove-weld symbol Indicates that root reinforcement is required on the opposite side of the joint. It does not specify reinforcement dimensions or acceptance criteria.
Consumable insert Mark used with a groove-weld symbol Calls for a consumable insert at the root as part of the specified joint preparation and welding procedure. Confirm insert material, fit-up and procedure from the drawing and WPS.
Backing or spacer Backing is placed opposite the groove symbol; a spacer modifies the groove symbol Identifies backing or a spacer used at the joint root under the drawing convention. The symbol does not by itself define material, dimensions, retention or removal.
Flush contour Contour symbol associated with the weld symbol Calls for the indicated flush contour at the weld face. A finish method letter, when required, is a separate instruction.
Convex contour Contour symbol associated with the weld symbol Calls for the indicated convex weld-face contour. Do not infer a required convex height from the contour mark alone.
Concave contour Contour symbol associated with the weld symbol Calls for the indicated concave weld-face contour. Do not infer a required concavity depth from the contour mark alone.

Search and sort apply to all 6 rows. Print and CSV include only the 6 rows shown on this page.

A melt-through indication calls for visible root reinforcement on the opposite side of a groove weld. It identifies a desired root result, but does not state a reinforcement height, weld size or acceptance level by itself. The drawing, welding code and inspection criteria must define those requirements for the actual joint.

A consumable-insert indication tells the fabricator to use a consumable insert at the root of the joint. The insert becomes part of the weld metal as the joint is welded. Its alloy, fit-up, preparation and use with a particular welding process need to match the qualified welding procedure and the project drawing.

A backing or spacer indication identifies a component placed at the root during welding. Backing may support the weld pool or establish the root opening; a spacer can hold a specified gap. The symbol name alone does not say whether the component stays in place, is removed, or what material it uses. Read the accompanying note and procedure.

Contour marks describe the intended shape of the finished weld face. A flush contour calls for a surface even with the adjacent material; convex and concave marks indicate the corresponding face shape. A finish method may be added when grinding, machining or another process is required, but contour alone does not establish a numerical profile tolerance.

A symbol is interpreted as part of the complete welding symbol and drawing convention. Its position relative to the reference line, arrow, tail and other marks affects the instruction. Standards can differ in construction details, so identify whether the drawing uses AWS A2.4, ISO 2553 or another stated system before applying a symbol from a quick-reference page.

Use the official drawing and current project specification to confirm all dimensions, side-of-joint instructions, process details, inspection methods and acceptance criteria. This table names the selected supplementary functions to help with a first reading; it does not qualify a procedure, select consumables or replace a weld inspection plan.

AWS A2.4:2020 is the current publisher-listed standard for symbols covering welding, brazing and nondestructive examination. The U.S. Navy chart is a concise visual reference for the selected names shown here. Consult the governing standard when symbol form or interpretation affects fabrication or acceptance.

The terms “weld symbol” and “welding symbol” refer to different levels of drawing information in AWS terminology. The weld symbol identifies the weld type; the complete welding symbol combines it with the arrow, reference line and optional instructions. Supplementary indications are interpreted in that complete layout. Reading a symbol in isolation can miss the side, sequence or additional requirement stated elsewhere on the drawing.

When reviewing a fabrication print, first identify the drawing standard, revision and project notes. Then read the joint detail, weld symbol, dimensions, tail references and inspection notes together. If an abbreviation, contour or backing instruction is ambiguous, request clarification through the project’s engineering process before welding. This short text reference is a starting aid for selected supplementary terms, not a substitute for that review.

The same mark can have different placement rules in different standards, and a contour instruction does not automatically describe how the weld is to be finished. Check the standard’s symbol chart and the drawing’s notes for the complete meaning. Fabrication teams should ensure that the welder, inspector and designer are using the same revision and interpretation before the work begins.

Sources

Symbol names are summarized from the U.S. Navy Welding Symbols Chart. AWS describes the scope of A2.4:2020, the standard for construction and interpretation of welding, brazing and nondestructive-examination symbols.