Density is mass per unit volume, so it is useful for quick material comparisons and preliminary weight estimates. This reference reproduces a small selection of values reported by the U.S. National Institute of Standards and Technology’s Center for Neutron Research at 295 K. It includes selected pure metals plus stainless steel 304 and a brass composition identified as 70% copper and 30% zinc. Treat the entries as approximate reference values; they do not replace a product specification or certificate.
Selected metal densities
Selected metal density reference
Approximate densities for selected pure metals and two named alloys, reported by NIST at 295 K.
1–8 of 8 matching rows (8 total)
Free engineering resource
Unlock CSV downloads and printing
Enter your email to download the displayed table page as CSV or print it.
CSV and print access for this browser session
Submit the form to unlock CSV downloads and printing.
Search and sort apply to all 8 rows. Print and CSV include only the 8 rows shown on this page.
How to use the values
For a uniform part, an initial mass estimate is density multiplied by volume. Keep units consistent: multiply a volume in cubic metres by density in kilograms per cubic metre to estimate kilograms, or use grams per millilitre with a volume in millilitres. The second density column is a direct unit conversion; one gram per millilitre equals one thousand kilograms per cubic metre. For example, a 100 mL solid copper volume at the listed approximate density gives about 896 g before accounting for holes, coatings, inserts, or manufacturing variation.
These values describe the selected material labels in the NIST reference table, not every product sold under those names. “Stainless steel 304” still covers product forms and conditions that can differ in density; the brass row is explicitly a 70/30 composition. Do not apply the brass entry to other copper-zinc alloys or assume that an unidentified steel is grade 304. Pure-metal values also do not describe alloys containing other elements.
Units and limits
The source reports density in g/mL at 295 K. The kg/m³ figures shown here are calculated conversions and are rounded to the same displayed precision as their source values. The reference temperature is close to ordinary room temperature, but the table is not a temperature correction model. Thermal expansion changes volume, and porosity, casting defects, composition, and measurement method can affect real parts.
Use this list for screening, classroom calculations, or a first-pass estimate. For purchasing, lifting plans, pressure-containing components, or safety-critical mass calculations, use the actual material grade and supplier documentation. When the material is a fabricated or composite product, use its declared density or weigh a representative sample rather than treating a pure-element value as a substitute.
Source
NIST Center for Neutron Research, Reference Tables — physical properties of selected metals at 295 K. Values are approximate and limited to the materials named in the source.
Estimate a part carefully
When estimating an assembly, separate solid material volume from the outside envelope. A hollow tube, pocketed plate, or machined housing contains less material than a solid block with the same external dimensions. For a simple part, calculate the volume of the basic shapes, subtract openings, and then multiply by the appropriate density. For a complex model, a CAD mass-properties result can provide the volume, but the selected material assignment still needs to match the real bill of materials.
Small differences in density can matter when a design includes many parts or a strict shipping limit. They should not be confused with measurement uncertainty or supplier tolerance. If the exact alloy is not represented in this short table, do not choose the nearest-looking row as a substitute. Ask the material supplier for a density declaration or use an appropriate current material specification. For an assembly with coatings, fasteners, fluids, or inserts, estimate each component separately and sum the results.
Make sure volume units are converted before multiplying. A model in cubic millimetres must be scaled to cubic metres or paired with density expressed in compatible units; otherwise the result can be wrong by several orders of magnitude. Record the material label, assumed temperature, source, and rounding alongside an estimate so that later revisions do not silently change its basis.
